WPL 3 way neodymium horn bi amp line array speaker

Type: Passive
Drivers: LF 2 x 12 ; MF 2 x 6.5"; HF 3 x 1”
Impedance: 8 ohms
Frequency Response: 52Hz-18kHz (± 3dB)

Kontaktiere uns

Inquiry Basket

Produktcode：

WPL

Erstausrüster：

Erhältlich

Probe：

Erhältlich

Zahlung：

PayPal,Western Union,T/T,Other

Herkunftsort：

China

Lieferfähigkeit：

500 piece Pro Monat

ÄHNLICHES PRODUKT

Kontaktiere uns

Name

Name can't be empty

* Email

Email can't be empty

Phone

Phone can't be empty

Company

Company can't be empty

* Message

Message can't be empty

einreichen

WPL Dual 12 inch Line Array Specification
TYPE	Three-way, bi-amp line array element
FREQUENCY RESPONSE	52Hz-18kHz ± 3dB
DRIVERS	LF: 2 x 12” (300mm)/3” (75mm) voice coil, ultra-long
	excursion, neodymium magnet drivers
	MF: 2 x 6.5” (165mm)/2” (50mm) coil, Ferrite
	magnet drivers, horn loaded
	HF: 3 x 1” (25mm) exit neodymium magnet
	compression drivers, horn loaded
MAXIMUM SPL	LF: 139dB, MF: 140dB, HF: 145dB
NOMINAL IMPEDANCE	LF: 8 ohms, MF + HF: 8 ohms
DISPERSION	90º horizontal (-6dB), 120º horizontal (-10dB),7.5° vertical
CROSSOVER	320Hz active, 4kHz internal passive
FINISH	multi-laminate birch and poplar-ply construction
FINISH	Black textured paint
CONECTORS	2 x NL4 type
DIMENSIONS (ex. pins)	(W) 1136mm x (H) 371mm x (D) 526mm
DIMENSIONS (ex. pins)	(W) 44.7in x (H) 14.6in x (D) 20.7in
WEIGHT	64kg (141lbs)


ANGLE ADJUSTMENT	CROSSOVER

LF : 12 inch neodymium magnet drivers Horn design and reflective loading for improved efficiency and output, improved directional control while reducing power consumption and noise from all directions of the horn.

MF : two 6.5 inch Ferrite magnet drivers The mid-frequency section uses two 6.5-inch cone-shaped cone drivers, which are responsible for the reproduction of the 300Hz to 4kHz vocal frequency signal, enhancing vocal clarity and consistency, more efficient and better directivity control than traditional direct-firing designs	HF : three 1 inch neodymium magnet The high-frequency part is equipped with three 1-inch throat drivers, which are responsible for signal reproduction above 4kHz, minimize distortion and expand high-frequency response.